is a mineral filled general purpose casting epoxy resin that is low cost and versatile. It features a low mixed viscosity for minimal bubble entrapment. Choose Fast, Medium or Slow catalyst to fit your project.
You can also use HT Hardener
to give your castings higher heat resistance.
is used for making hard dies for metal stamping as well as patterns and fixtures. It is also used for electrical encapsulation to extend the life cycles and enhance the performance of potted electronic devices. The high compressive strength of EpoxAcast® 650
makes it ideal for making stamping dies for production pressing of metal ornaments.
EpoxAcast 650 Base (Part A) & Hardener (Part B) sold separately. Choose from 101 FAST, 102 MEDIUM, 103 SLOW or HT Hardener
|EpoxAmite Hardener Reference - When Using EpoxAcast® 650 Part A |
| || Mix Ratio || Pot Life || Cure Time |
| 101 FAST Hardener || 100A:12B by weight || 20 Minutes || 1 Hour |
| 102 MEDIUM Hardener || 100A:13B by weight || 90 Minutes || 4 Hours |
| 103 SLOW Hardener || 100A:14B by weight || 3.5 Hours || 24 Hours |
| HT HIGH TEMPERATURE Hardener || 100A:10B by weight || 3.0 Hours || 24 Hours followed by: Heat cure for 2 hrs at 175°F/80°C followed by 3 hrs at 300°F/150°C |