Alja-Safe® Crystaline-Silica Free Alginate

Alja-Safe® Skin Safe Crystalline-Silica Free Alginate

Alja-Safe^® is a new addition to the Smooth-On family of "Life Casting" mold making materials. Alja-Safe^® alginate is suitable for making "temporary" molds of the face, hands and other body parts. (For making re-usable molds of any body part, use "Body Double^®" silicone rubber.)What's Sets Alja-Safe^® Apart? In addition to being an exceptional skin safe body molding material, Alja-Safe^® alginate does not contain free crystalline silica (a known carcinogen). Alja-Safe^® also captures detail better than other alginates, giving you a more accurate reproduction of your original.

Alja-Safe^® is easy to use and cures quickly. It reproduces fine detail and makes and excellent temporary mold - good for one or two reproductions of any body part. You can then cast plaster, Matrix^® NEO^® (polymer modified gypsum) or Smooth-Cast^® 300Q fast urethane resin into the mold to make a reproduction.

NOTE - ALL SPECIFICATIONS OBTAINED USING 80°F / 23°C WATER

Working time and demold time can be reduced by using warmer water. Cooler water will give a longer working time and extend the demold time.

Product Name:

A:B Mix Ratio

Demold Time

Pot Life

Weight: CU.IN./LB

ALJA-SAFE®

1 Water: 1 Alja-Safe Powder By Volume

10 min.

8 min.

26.0

Using Alja-Safe Alginate to Make Molds of Body Parts

Making a Mold of a Face Using Alja-Safe Alginate

Making a Mold of a Hand Using Alja-Safe Alginate

Click Here to View the Full Sequence Alja-Safe® Lifecasting Quick Start Guide	Click Here to View the Full Sequence Using Alja-Safe® Alginate to Cast Silicone Body Parts	Click Here to View the Full Sequence Alja-Safe® Hand Castings Go Wild!
Click Here to View the Full Sequence Face Casting with Alja-Safe® Crystalline Silica-Free Alginate