Smooth-On Mold Making and Casting Materials
Home Technical Info How To Frequently Asked Questions Media Gallery News Find a Distributor Mold Makers Directory
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
About Us Seminars Tech Support Contact My Account Buy Now Smooth-On Home enews
Material Calculator
and Unit Convertor
Custom Formulating
Newsletter Signup

Get Smooth-On's Greatest Catalog Ever! Click Here

Body Double® Accessories

HYPER-FOLIC® Release Additive For Body Double
 HYPER-FOLIC® Release Additive For Body Double
HYPER-FOLIC® Release Additive For Body Double
Technical Bulletin
MSDS
HYPER-FOLIC® Release Additive is a non-toxic, skin conditioning liquid that is mixed with Body Double® silicone mold rubber prior to applying rubber to the skin.

HYPER-FOLIC® will not only aid in releasing cured rubber from the skin but will also release cured rubber from hair-covered skin surfaces (closely cropped beards, moustaches, eye-brows, pubic hair, etc.)

Body Double Release Cream
 Body Double Release Cream
Body Double Release Cream
Technical Bulletin
MSDS
Body Double® Release Cream is a non-toxic skin conditioner that will aid in releasing Body Double® mold rubber from skin surfaces with or without hair. It washes off with soap and water. It is highly concentrated, so a little goes a long way.

To use, wash intended body section with soap and water and dry thoroughly. Liberally apply Body Double® Release Cream to all skin surfaces (bare and hair covered) that will contact mold rubber. Take Special Care to aggressively message and work the cream into and over body hair.

Body hair not thoroughly coated with release cream will become encapsulated and stuck in rubber - difficult & painful to remove.  Release Cream can be used in conjunction with HYPER-FOLIC® release additive.

Manual Dispensing Gun
 Manual Dispensing Gun
Manual Dispensing Gun
Dispenses 400 ml. cartridges of mold rubber with squeeze of handle.

Gypsona Plaster Bandages - For Creating Quick Support Shells
 Gypsona Plaster Bandages - For Creating Quick Support Shells
Gypsona Plaster Bandages - For Creating Quick Support Shells
Plaster bandage material is immersed in water and layered over cured Body Double® mold rubber or Alja-Safe® alginate. Bandages dry and form a rigid support shell (or "mother mold") that holds the rubber mold in shape during the casting process.Bandages available in 4" and 8" widths x 5 yards.


Smooth-On, Inc. Copyright © 2011
2000 Saint John Street, Easton PA 18042 | Order Desk: 800.762.0744 | Fax: 610.252.6200 | Tech Help: 800.381.1733 or 484.546.0466

E-Commerce Solutions