EZ-Spray® Silicone 35

EZ Spray® Silicone 35 is a platinum cure Silicone 35 rubber developed specifically for spraying through the EZ~Spray® Junior Cartridge System. With no or minimal surface preparation, EZ Spray® Silicone 35 can be sprayed onto vertical surfaces for making fast rubber molds of large surface areas. After a suitable thickness is attained, EZ Spray® Silicone 35 cures in 1 hour with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials. Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray® Silicone 35 will cover approximately 1.66 sq. ft. (0.15 square meters).

Product Name:	A:B Mix Ratio	Color	Demold Time	Elongation at Break	Mixed Viscosity	Pot Life	Shore A Hardness	Tear Strength	Tensile Strength	Weight: CU.IN./LB
EZ-Spray® 35 Silicone Rubber	1A:1B by volume	Purple	1 hour	415%	17000 cps	1.5 minutes	35	100 pli	490 psi	24.1

Spraying Mold Rubber And Plastic

Click Here to View the Full Sequence Avoiding a very expensive repair bill by using EZ-Spray® Rubber

Click Here to View the Full Sequence Making Molds To Replace Crumbling Stonework at a University In Australia

Click Here to View the Full Gallery J and J Architectural Plastics Finds a New Use for duoMatrix® NEO

Share   |   Digg this   |   Google Bookmark this   |   Add to Yahoo myWeb