XTEND-IT™

XTEND-IT™ *NOTE: Product Packaging May Vary

XTEND-IT™ is a dry gas blanket designed to extend the shelf life of unused moisture sensitive polyurethane products. Applying the XTEND-IT™ dry gas blanket to the unused portion of a liquid polyurethane system will minimize residual moisture in the container and significantly extend the shelf life of what remains.

Instructions

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.


APPLICATION - For maximum benefit, XTEND-IT™ should be applied every time your polyurethane container is opened. For two component polyurethane products, the use of XTEND-IT™ in the part A of the material is the best way to ensure that residual moist air is removed from the material container.

  • Store and use at room temperature (73°F / 23°C)
  • Use with adequate ventilation
  • Do not shake can
  • Keep can upright and level when spraying
  • Partially close lid on container to be sprayed
  • Place XTEND-IT™ nozzle under container lid and spray for a few seconds. Spray time will depend on container used. For example:
    • A half full 1 Gallon container need only be sprayed for 1-2 seconds.
    • A half full 5 Gallon container for about 4 - 5 seconds.
  • Immediately replace lid on the container making sure that it is secure in all directions.


Related Categories: Urethane Rubber, Urethane Resins, Epoxy and Urethane Coatings

Related Series: Urethane Rubber Accessories – Take Your Urethane Rubber Further, Urethane Resin Accessories – Take Your Urethane Resin Further

How-To Articles

video

How To Extend the Shelf Life of Urethane Rubber and Resin

How To Extend the Shelf Life of Urethane Rubber and Resin

XTEND-IT® is a dry gas blanket designed to extend the shelf life of moisture sensitive polyurethane products.

 View How-To Article