Find Your Nearest Distributor

Order Online

   • Spray-It On       • Apply By Hand

Smooth-On Has Your Mold Rubber !

ReoFlex™ Urethane Rubbers are “next generation” mold rubbers for casting plaster, concrete, wax, etc. ReoFlex™ rubbers are easy to mix & pour. Hardness options: 10A      20A       30A         40A         50A        60A Softer                                                Harder

	Get the Most  Out of Your Production Molds

Brush-On™ 40 Brush-On™ 50 Brush-On™ 60 Holds a vertical surface or inverted surface better than any other mold rubber, and produces very fine detail. Molds are incredibly strong and are great for production casting of Matrix, gypsum, concrete, etc.
Used by restoration pros around the world!

Mold Max™ Silicones
			Mold Max Silicones (10A-40A) feature high tear strength and are great for production  casting of resins, plasters, etc.
Above: Reproducing 300+ year old frame with soft Mold Max 10. Casting made from Matrix NEO. Perfect detail reproduction.

	Mix & Apply-By-Hand Mold Putty
	The Fastest, Easiest Way  Yet to Make Molds No-mess silicone putty.  Mix by hand and apply on-site.  Rubber cures in minutes and has good tear strength. Cast resins, Matrix NEO, wax, etc.

 

The EZ~Spray Junior System
The EZ~Spray Junior System features an air-powered cartridge gun that sprays urethane rubber, silicone rubber and urethane plastics and foam. Make fast molds on-site using the EZ~Spray™ materials.
• EZ~Spray™ 45 Urethane Rubber - For making sprayed rubber molds used to cast concrete, plaster, wax, etc. Surface preparation (applying sealing agent + release agent) required. • EZ~Spray™ Silicone Rubber - For making fast sprayed rubber molds that have the best release properties for production casting of resins, plaster, etc. Minimal surface preparation required. • EZ~Spray™ Urethane Plastic - For spraying over cured rubber molds to make fast support shells / mother molds. Plastic can also be sprayed into rubber molds to make fast, lightweight castings. • EZ~Spray Rigid Foam - Make lightweight castings, create special effects or use for lightweight reinforcement. • StyroCoat™ Styrofoam Coating - Coat large areas of styrofoam quickly with a plastic that is impact resistant. Can then be sanded, primed and painted. Great for creating themed environments, theater and movie special effects.