Smooth-On Mold Making and Casting Materials
Home Technical Info How To Frequently Asked Questions Media Gallery News Find a Distributor Mold Makers Directory
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
About Us Seminars Tech Support Contact My Account Buy Now Smooth-On Home enews
Material Calculator
and Unit Convertor
Custom Formulating
Newsletter Signup

Get Smooth-On's Greatest Catalog Ever! Click Here
1

                   
What is the best method for mixing mold rubber?

There are many factors that can contribute to mold rubber not curing including cold temperatures, contaminants on a model’s surface, etc.
But the most common reason: inadequate mixing of Parts A & B. People mixing rubber for the first time tend to under-mix the material before applying. It is especially easy to under-mix thick materials like silicone or brush-on rubber. Mixing large volumes of material also poses the risk of inadequate mixing.

Mixing Success: A Function Of Time & Technique - Time - Most mold rubbers give you plenty of time to mix and apply, so don’t worry about not having enough time. Your goal in mixing is to be thorough, not fast.

Technique: Don’t Be Casual, Be Aggressive - This is where most “first timers” make the fatal mistake of using a “limp wrist”, meaning that they are not aggressive enough in mixing the rubber. Use a stiff mixing paddle and employ a firm wrist, making sure that you scrape the sides and bottom of your mixing container several times. Important material hides on the bottom and sides of your mixing container and failure to get this material into the mix will result in the rubber not properly curing.

The Best You Can Do -

“The Double Mix-And-Pour” Technique - After mixing thoroughly for 3 minutes, empty the contents of your mixing container into a second clean mixing container and mix again for another 2 to 3 minutes before applying over your model. This technique is your best bet for successful mixing and the protection of your mold rubber investment.


Mixing Large Amount Of Rubber Using A Mechanical Mixer?

If using a drill with a “Squirrel Mixer” or other attachment to mix large amount of rubber, mix Parts A & B for 3 minutes at a low RPM. Take a mixing paddle and scrape the sides and bottom of your mixing container several times. Important material hides on the bottom and sides of your mixing container and failure to get this material into the mix will result in the rubber not properly curing.

Empty the contents of your mixing container and use the drill to mix
again for another 2 minutes. Use the paddle to again hand mix (scrape the sides and bottom of your mixing container several times) for 2 minutes and apply over your model. This technique is your best bet for successful mixing and protection your mold rubber investment.

 



The FAQ list is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Material Safety Data Sheets (MSDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.




Click Here to Submit an FAQ
Smooth-On, Inc. Copyright © 2011
2000 Saint John Street, Easton PA 18042 | Order Desk: 800.762.0744 | Fax: 610.252.6200 | Tech Help: 800.381.1733 or 484.546.0466

E-Commerce Solutions