FAQ: Is there a way to improve surface finish when casting a rigid or flexible foam?
Smooth-On Mold Making and Casting Materials
Home Technical Info How To Frequently Asked Questions Media Gallery News Find a Distributor Mold Makers Directory
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
About Us Seminars Tech Support Contact My Account Buy Now Smooth-On Home enews
Material Calculator
and Unit Convertor
Custom Formulating
Newsletter Signup

Get Smooth-On's Greatest Catalog Ever! Click Here


Is there a way to improve surface finish when casting a rigid or flexible foam?

You can improve surface finish by applying back pressure.

For Example:

Without applying back pressure, surface finish reveals open foam cells.

Drill holes into a board that can cover mold opening during casting.

img_0407_200 img_0422_200
Apply Ease Release™2831 to board. Pour foam into mold and place board over mold with holes centered over cavity.

Hold board firmly in place until foam stops rising. Let foam cure for 2 hours.

Use a scraping tool to remove excess foam.

Board is removed to reveal flat back of the casting.

Pressure uniformly compressed foam into mold detail resulting in better surface finish.

The FAQ list is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Material Safety Data Sheets (MSDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.

Click Here to Submit an FAQ
Smooth-On, Inc. Copyright © 2015
5600 Lower Macungie Road, Macungie PA 18062 | Order Desk: 800.762.0744 | Fax: 610.252.6200 | Tech Help: 800.381.1733 or 484.546.0466
Seminar Entrance: 1725 Willow Lane, East Texas, PA 18046

E-Commerce Solutions