Smooth-On Mold Making and Casting Materials
Home Technical Info How To Frequently Asked Questions Media Gallery News Find a Distributor Mold Makers Directory
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
About Us Seminars Tech Support Contact My Account Buy Now Smooth-On Home enews
Material Calculator
and Unit Convertor
Custom Formulating
Newsletter Signup

Get Smooth-On's Greatest Catalog Ever! Click Here
                   
How can I make my Mold Max® tin silicone rubber cure faster?

Unlike platinum silicone rubbers (Dragon Skin® or Smooth-Sil® products) which can be heat cured, tin-cured silicones do not respond to heat. Your only option is to add a chemical to accelerate the silicone.

Adding Accel-T® dramatically reduces the working time (pot life) and demold time of Mold Max® silicone rubbers. A small amount will speed up the material considerably.  Accel-T® should be added to Part B by weight and thoroughly pre-mixed before adding Part A.

Very Important - Accel-T® will reduce the library life of the cured rubber mold in proportion to the amount used. For example, Mold Max® 30 normally has a library life of at least 5 years. Using 1% Accel-T® will reduce the library life to less than 1 year.

The following offers percentages of Accel-T® and the corresponding affects on pot-life and demold time.

 

Mold Max® 10

Mold Max® 20

Mold Max® 30

Mold Max® 40

Mold Max® XLS

0.2 %

Accel-T

Pot Life

20 min.

15 min.

15 min.

15 min.

30 min.

Cure

3 hrs.

2 hrs.

3 hrs.

2 hrs.

4 hrs.

 

 

 

 

 

 

 

1%

Accel-T

Pot Life

10 min.

5 min.

7 min.

8 min.

15 min.

Cure

1 hr.

1 hr.

1 hr.

1 hr.

2 hrs.


Note: Accel-T® does not have an affect on platinum-based silicones.


The FAQ list is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Material Safety Data Sheets (MSDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.




Click Here to Submit an FAQ
Smooth-On, Inc. Copyright © 2011
2000 Saint John Street, Easton PA 18042 | Order Desk: 800.762.0744 | Fax: 610.252.6200 | Tech Help: 800.381.1733 or 484.546.0466

E-Commerce Solutions