What paint should I use and how can I make paint stick to my resin castings?

You have made the perfect mold and just poured Smooth-Cast™ liquid plastic into the mold to make a reproduction. The plastic cures, and you demold the piece to reveal a casting that looks exactly like the original. Your next step is to paint the casting for outdoor display, but when you try to apply the paint it beads up on the casting surface and won't stick.

Urethane plastics can be hard to paint, and there are a number of variables that can affect the outcome. Using a release agent to release the casting from the mold, for example, makes painting a casting almost impossible. Removing release agent from the casting surface can be difficult and is another labor step.

If you are using a urethane rubber mold and casting urethane resin, you must use a release agent to facilitate demold. Using a silicone rubber mold without release agent limits the production life of the mold by half if you are casting urethane resin (related: FAQ: How can I remove release agent from my casting?)

Pro Tip: There are a couple of ways to get the benefits of using a release agent and still have a casting ready for painting following demold.

Option - Use Maker Pro Paints

When used with the Adhesion Promoter, Maker Pro Paints™ will bond tenaciously to various rigid substrates – including: rigid urethanes, rigid urethane foams, epoxy plastics, wood, fiberglass, aluminum, concrete, plasters, steel, and more. When mixed with the FLEX Additive, Maker Pro Paints™ will become more elastic and bond to flexible or semi-rigid substrates including fabrics, semi-rigid urethane resins, flexible urethane foams, urethane rubbers, and latex rubbers.

Learn more about Maker Pro Paints here!

Powder Coating Technique

Powder coating the mold with URE-FIL™ 7, baby powder or talc following the application of a release agent. Here is how it works:

  1. Prior to casting the resin, Ease Release™ 200 is applied to the mold followed by a powder coating of URE-FIL™ 7.
  2. An air hose is used to blow any excess powder from the mold. The urethane resin is then cast into the mold.
  3. The casting comes out of the mold with a dry, matte finish. An auto body primer is applied, followed by an acrylic paint and finally an acrylic sealer. The major advantage to powder coating is that there is no release agent to remove when the casting comes out of the mold. Models can be immediately primed and painted.

Apply Primer To The Mold Surface

The other way is to use a spray primer. Here's how it works:

Following the application of a release agent, an auto body primer is applied to the mold cavity. Casting resin is then mixed and poured or sprayed. The auto body primer bonds to the casting's surface and comes out of the mold ready for painting.

Which Primer Should I Use?

Customers contact us regularly asking which primer works best as a foundation for painting their Smooth-On plastic castings. To settle the question once and for all, we tested over 30 aerosol primers and found that most did not work, or worked poorly at best.

The low-quality primer would "bead up" on the surface of the casting.

Whether applied to the rubber mold surface or applied to cured castings (no release agent used), two primers did stand out, providing excellent adhesion and the best for painting.

What type of paint should I use?

After primer has completely dried, the casting may be painted. Acrylic paints generally work best. Model train paints (available at many hobby stores) work well. Some testing for paint compatibility may be necessary.

Disclaimer
This FAQ article is offered as a guideline and offers possible solutions to problems encountered during mold making and casting. No warranty is implied and it is up to the end user to determine suitability for any specific application. Always refer to the provided Technical Bulletins (TB) & Safety Data Sheets (SDS) before using any material. A small scale test is suggested to determine suitability of any recommendation before trying on a larger scale for any application.