Versatile, Fast , Mold Putty Used To Restore Antique Picture Frame

Versatile, Fast , Mold Putty Used To Restore Antique Picture Frame

Equinox^® Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand to a variety of surfaces. Equinox^® Putty is mixed in equal amounts (1A:1B) by volume. Pot life is about 1 minute with a cure time of about 7 minutes at room temperature (72°F / 23°C). Equinox 40 is a slower version with a 30-minute pot life and 5-hour demold time.

Convenient, No Mess - Fastest, Easiest Way Yet To Make A Mold. Fast Cure And Slow Cure Versions Available

In this example, Equinox is used to mold a section of an antique wooden picture frame. A casting is poured into the mold, which is then finished and glued in place to form a perfect repair.

1 - No mess silicone putty, mix and apply by hand. QUICK AND EASY	2 - Antique picture frame with small piece missing	3 - Dispense equal amounts of putty in your hand.
4 - Fold part A around part B until a uniform color is achieved	5 - Press putty firmly into similar frame detail	6 - Demold silicone putty from frame in 7 minutes
7 - Measure Smooth-Cast® 325 resin and metal powders	8 - Mix resin and metal powders together	9 - Fill syringe with resin mixture
10 - Dispense resin into mold rubber	11 - Demold casting. Exact detail reproduced	12 - Highlight resin with shoe polish and seal with clear acrylic spray
13 - Glue casting into place	14 - PERFECT RESTORATION!