1 - Ez-Spray® foam cartridge is opened by prying off the tip of the cartridge. Note - gloves are recommended when working with any materials.

2 - A flow regulator (included) is installed before adding the static mixing tube.

3 - A static mixer (included) is installed on the cartidges.

4 - The collar is tightened over mixer tube.

5 - Cartridge with mixer is loaded into the EZ-Spray® gun and the air line hose is attached.

6 - Material is started through the gun by ejecting a small amount into a waste bucket. This is done to insure a good mix and to put only well mixed material into the mold.

7 - Rebound® 25 brush-on mold complete with support shell is positioned for spraying.

8 - Wearing a Niosh approved mask, the landscaper delivers an even coat across the surface of the mold.

9 - The foam quickly begins to expand and form the hollow shell.

10 - Another quick coat is added to ensure a strong, even piece.

11 - Foam is allowed to fully cure before demold.

12 - The Rebound® 25 silicone glove mold easily peeled from the casting.

13 - The finished casting displays excellent detail.

14 - Extra material is carefully cut away with a utility knife.

15 - Taupe color spray enamel is sprayed on to the surface and allowed to dry.

16 - A polyurethane stain is brushed over the surface to add variation and depth.

17 - The faux rock speaker blends in to surrounding landscape delivering audio ambiance.

18 - The manufacturer offers several sizes and finishes.

19 - Several custom speaker rocks were installed around the property to deliver balanced audio without being offensive to the natural landscape.