Compare Tool

Add Material to Compare

start over

All Technical Data

EZ-Spray® Silicone 20
Product Type
  • Silicone Rubber - Platinum Cure
Mixed Viscosity11,000 cps
Mix Ratio By Volume1A:1B
Pot Life3 minutes
Cure Time20 minutes
Shore A Hardness20
Specific Gravity1.08 g/cc
Specific Volume25.6 cu. in./lb.
ColorTranslucent Green
Die B Tear Strength100 pli
Tensile Strength495 psi
Elongation @ Break470 %
100% Modulus47 psi
Shrinkage<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F

Product Description

EZ-Spray® Silicone 20

EZ~Spray® Silicone 20 is a sprayable silicone which cures quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 20 cures in about 20 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›