Compare Tool

Vs.

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Mix and Pour Expanding Foams
Mixed Viscosity11,000 cps1,000 cps
Pot Life5 minutes90 seconds
Cure Time45 minutes2 hours
Shore A Hardness22
Specific Volume25.6 cu. in./lb.63 cu. in./lb.
ColorTranslucent GreenWhite
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22FlexFoam-iT!™ 25
Product Type
  • Silicone Rubber - Platinum Cure
  • Mix and Pour Expanding Foams
Mixed Viscosity11,000 cps1,000 cps
Mix Ratio By Volume1A:1BN/A
Mix Ratio By Weight1A:2B
Pot Life5 minutes90 seconds
Tack Free Time2 hours
Cure Time45 minutes2 hours
Shore A Hardness22
Expansion (approximate)2 times
Foam Density25 lb/ft³
Specific Gravity1.08 g/cc0.4 g/cc
Specific Volume25.6 cu. in./lb.63 cu. in./lb.
ColorTranslucent GreenWhite
Die B Tear Strength102 pli
Tensile Strength490 psi
Elongation @ Break450 %
100% Modulus49 psi
Shrinkage<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

FlexFoam-iT!™ 25

FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.

Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties. FlexFoam-iT!™ 25 is the highest density foam and expands the least.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›