Compare Tool

Vs. Vs.
remove

Ecoflex™ 00-33AF Anti Fungal

EZ-Spray® Silicone 22 vs. EZ-Spray® Foam vs. Ecoflex™ 00-33AF Anti FungalEZ-Spray® Silicone 22 versus EZ-Spray® Foam

Anti-Fungal Shore 00-33 Platinum Silicone

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Mix and Pour Expanding Foams
  • Silicone Rubber - Platinum Cure
Mixed Viscosity11,000 cps400 cps3,000 cps
Pot Life5 minutes13 seconds45 minutes
Cure Time45 minutes10 minutes4 hours
Shore A Hardness2200-33
Specific Gravity1.08 g/cc0.128 g/cc1.07 g/cc
ColorTranslucent GreenTanOff-White Translucent
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22EZ-Spray® FoamEcoflex™ 00-33AF Anti Fungal
Product Type
  • Silicone Rubber - Platinum Cure
  • Mix and Pour Expanding Foams
  • Silicone Rubber - Platinum Cure
Mixed Viscosity11,000 cps400 cps3,000 cps
Mix Ratio By Volume1A:1B1A:1B1A:1B
Pot Life5 minutes13 seconds45 minutes
Tack Free Time2 minutes
Cure Time45 minutes10 minutes4 hours
Shore A Hardness2200-33
Expansion (approximate)7 times
Specific Gravity1.08 g/cc0.128 g/cc1.07 g/cc
Specific Volume25.6 cu. in./lb.26.0 cu. in./lb.
ColorTranslucent GreenTanOff-White Translucent
Die B Tear Strength102 pli38 pli
Tensile Strength490 psi200 psi
Elongation @ Break450 %900 %
100% Modulus49 psi10 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)500 °F450 °F

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

EZ-Spray® Foam

EZ~Spray® Foam is a polyurethane foam compound that can be conveniently sprayed using Smooth-On’s EZ~Spray® Junior System. Foam cures quickly to strong, lightweight and impact resistant 8 lb. rigid foam that can be used for a variety of applications including making lightweight castings. Foam can also be sprayed over certain rubber mold configurations as a mother mold material. For more information, refer to SmoothOn’s EZ~Spray® Junior manual and video.

Read More

Ecoflex™ 00-33AF Anti Fungal

Ecoflex™ 00-33 AF is an anti-fungal silicone rubber that resists the growth of fungi. Parts A and B are mixed 1:1 by weight or volume, pot life is about 45 minutes and rubber cures in about 4 hours at room temperature with negligible shrinkage. 

Ecoflex™ 00-33 AF is suitable for making a variety of skin-safe cushioning device configurations that resist fungi for orthopedic and orthotic applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›