Compare Tool

Vs.

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
Mixed Viscosity11,000 cps2,800 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life5 minutes62 minutes
Cure Time45 minutes24 hours
Shore D Hardness85
Shore A Hardness22
ColorTranslucent GreenWhite
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22EpoxAmite™ WHITE 102
Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
Mixed Viscosity11,000 cps2,800 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:23B
Pot Life5 minutes62 minutes
Thin Film Working Time120 minutes
Cure Time45 minutes24 hours
Shore D Hardness85
Shore A Hardness22
Specific Gravity1.08 g/cc1.23 g/cc
Specific Volume25.6 cu. in./lb.22.5 cu. in./lb.
ColorTranslucent GreenWhite
Die B Tear Strength102 pli
Tensile Strength490 psi
Tensile Modulus557,000 psi
Ultimate Tensile5,600 psi
Tensile Elongation1.2 %
Elongation @ Break450 %
100% Modulus49 psi
Compressive Strength11,960 psi
Compressive Modulus114,000 psi
Flexural Strength8,350 psi
Flexural Modulus446,000 psi
Shrinkage<.001 in. / in.
Heat Deflection Temp133 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F
Flexural Strength on 6 ply / 10 oz. Laminate31,600 psi
Ultimate Tensile on 6 ply / 10 oz. Laminate30,700 psi

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

EpoxAmite™ WHITE 102

EpoxAmite™ White Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ White Laminating System is odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.

EpoxAmite™ White Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up& applications or composite parts. EpoxAmite™ White Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›