Compare Tool

Vs.
remove

Mold Max™ 20

Mold Max™ 20 vs. EZ-Spray® Silicone 22EZ-Spray® Silicone 22

High Performance Silicone Rubber

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Tin Cure
Mixed Viscosity11,000 cps25,000 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life5 minutes45 minutes
Cure Time45 minutes24 hours
ColorTranslucent GreenLight Pink
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22Mold Max™ 20
Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Tin Cure
Mixed Viscosity11,000 cps25,000 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:10B
Pot Life5 minutes45 minutes
Cure Time45 minutes24 hours
Shore A Hardness2220
Specific Gravity1.08 g/cc1.18 g/cc
Specific Volume25.6 cu. in./lb.23.5 cu. in./lb.
ColorTranslucent GreenLight Pink
Die B Tear Strength102 pli110 pli
Tensile Strength490 psi555 psi
Elongation @ Break450 %512 %
100% Modulus49 psi49 psi
Shrinkage<.001 in. / in.0.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)500 °F400 °F

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

Mold Max™ 20

Mold Max™ Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max™ Silicones feature Smooth-On’s exclusive “Libra™” catalyst for long library life. Mold Max™ silcones can be pigmented with Silc Pig™ silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Vacuum degassing mixed material using a vacuum pump and chamber to remove entrapped air is recommended.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›