Compare Tool

Vs.
remove

Dragon Skin™ 10 NV

EZ-Spray® Silicone 22 vs. Dragon Skin™ 10 NVEZ-Spray® Silicone 22

Low Viscosity, High Performance Platinum Silicone

 View Product

Add Material to Compare

start over

Key Differences

Mixed Viscosity11,000 cps6,000 cps
Pot Life5 minutes15 minutes
Cure Time45 minutes75 minutes
Shore A Hardness2210
ColorTranslucent GreenWater White Translucent
Elongation @ Break450 %663 %
100% Modulus49 psi27 psi
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22Dragon Skin™ 10 NV
Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Platinum Cure
Mixed Viscosity11,000 cps6,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B
Pot Life5 minutes15 minutes
Cure Time45 minutes75 minutes
Shore A Hardness2210
Specific Gravity1.08 g/cc1.07 g/cc
Specific Volume25.6 cu. in./lb.25.8 cu. in./lb.
ColorTranslucent GreenWater White Translucent
Die B Tear Strength102 pli90 pli
Tensile Strength490 psi400 psi
Elongation @ Break450 %663 %
100% Modulus49 psi27 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

Dragon Skin™ 10 NV

Dragon Skin™ 10 NV is a low viscosity, high performance platinum cure silicone rubber that is easy to use and versatile. Mix ratio is 1A:1B by weight or volume, pot life is 15 minutes and cure time is 75 minutes at room temperature. Rubber cures with negligible shrinkage to a Shore 10A. Vacuum degassing is not necessary Color is water white translucent.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›