Compare Tool

Vs.
remove

Black Panther™ 85

EZ-Spray® Silicone 22 vs. Black Panther™ 85EZ-Spray® Silicone 22

Formerly Black Cat 85 - Flexible Black Repair Adhesive

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Adhesives
Mixed Viscosity11,000 cps5,400 cps
Pot Life5 minutes3.5 minutes
Cure Time45 minutes2.5 hours
Shore A Hardness2285
ColorTranslucent GreenBlack
Tensile Strength490 psi3,400 psi
Elongation @ Break450 %121 %
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22Black Panther™ 85
Product Type
  • Silicone Rubber - Platinum Cure
  • Adhesives
Mixed Viscosity11,000 cps5,400 cps
Mix Ratio By Volume1A:1B1:1
Mix Ratio By Weight100A:92B
Pot Life5 minutes3.5 minutes
Cure Time45 minutes2.5 hours
Shore A Hardness2285
Specific Gravity1.08 g/cc1.11 g/cc
Specific Volume25.6 cu. in./lb.25 cu. in./lb.
ColorTranslucent GreenBlack
Die B Tear Strength102 pli
Die C Tear Strength175 pli
Tensile Strength490 psi3,400 psi
Elongation @ Break450 %121 %
100% Modulus49 psi
Shrinkage<.001 in. / in.0.0038 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F
Modulus of Elasticity in Tension700 psi

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

Black Panther™ 85

Formerly Black Cat™ 85

Black Panther™ 85 is a two-component, fast curing liquid adhesive for repairing holes, tears and splits in steel / fabric corded rubber conveyor belts, providing high wear and abrasion resistance.

It also provides a strong, flexible bond between a variety of substrates including plaster, wood, cement, stone, glass, hard plastics and a variety of metals.
Working time is 3.5 minutes and cure time is 2.5 hours at room temperature (73° F / 23° C).

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›