Compare Tool

Vs.
remove

Brush-On® 40

Brush-On® 40 vs. EZ-Spray® Silicone 22EZ-Spray® Silicone 22

"Brushable" Polyurethane Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity11,000 cpsBrushable
Pot Life5 minutes20 minutes
Cure Time45 minutes16 hours
Shore A Hardness2240
ColorTranslucent GreenOff White
Tensile Strength490 psi300 psi
Elongation @ Break450 %1,000 %
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

EZ-Spray® Silicone 22Brush-On® 40
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity11,000 cpsBrushable
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight100A:125B
Pot Life5 minutes20 minutes
Cure Time45 minutes16 hours
Shore A Hardness2240
Specific Gravity1.08 g/cc1.17 g/cc
Specific Volume25.6 cu. in./lb.23.7 cu. in./lb.
ColorTranslucent GreenOff White
Die B Tear Strength102 pli
Die C Tear Strength60 pli
Tensile Strength490 psi300 psi
Elongation @ Break450 %1,000 %
100% Modulus49 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)500 °F

Product Description

EZ-Spray® Silicone 22

EZ~Spray® Silicone 22 are sprayable silicones which cure quickly to soft rubbers with high elongation and tear strength. Liquid silicone is sprayed through the EZ~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable thickness is attained, EZ~Spray® Silicone 22 cures in about 45 minutes. EZ~Spray® Silicone cures with negligible shrinkage to strong, durable silicone rubbers good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

Read More

Brush-On® 40

Smooth-On’s Brush-On® Series of mold rubbers are extremely versatile and are famous for their abrasion resistance and high tear strength. They have the convenience of a one-to-one mix ratio and are easy to mix and apply with a brush or spatula.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›