Compare Tool

remove

Econ® 60

Econ® 60 Technical Specifications

Lower Cost Shore 60A Urethane Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Econ® 60
Product Type
  • Urethane Rubber
Mixed Viscosity1,400 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B
Pot Life6 minutes
Handling Time4 hours
Cure Time16 hours
Shore A Hardness60
Specific Gravity1.04 g/cc
Specific Volume26.7 cu. in./lb.
ColorTranslucent Amber
Die C Tear Strength85 pli
Tensile Strength350 psi
Elongation @ Break500 %
100% Modulus82 psi
Shrinkage<0.001 in. / in.

Product Description

Econ® 60

Econ® 60 is an economical and fast curing Shore 60A urethane rubber. It has no odor, features a convenient 1A:1B by volume mix ratio and a low viscosity for easy mixing and pouring.  Working time is about 6 minutes and handling time is 4 hours at room temperature. Translucent clear amber color (light passes through) makes Econ® 60 easy to color with SO Strong®, UVO® or IGNITE® colorants.  Econ® 60 is used to make limited run production rubber molds, stamping pads, rubber prototype parts, rubber props and pour-in-place gaskets for industrial equipment. It is also suitable for coating fabrics.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›