|Mixed Viscosity||4,000 cps|
|Mix Ratio By Volume||2A:1B|
|Mix Ratio By Weight||100A:44B|
|Pot Life||22 minutes|
|Thin Film Working Time||35 minutes|
|Thin Film Recoat Time||3 hours|
|Cure Time||16 hours|
|Shore D Hardness||65|
|Specific Gravity||1.11 g/cc|
|Specific Volume||25.0 cu. in./lb.|
Epsilon™ PRO is a thixotropic epoxy coating that self-thickens for brushing onto a variety of surfaces. Compared to original Epsilon™, Epsilon™ PRO offers a longer working time and cured epoxy is semi-rigid, offering better impact resistance. Mix ratio for Epsilon™ PRO is 2A:1B by volume (100A:44B by weight). A gram scale is not needed to use this product.
Applied in thin layers, mixed material holds a vertical surface without sagging or slumping. Material wets out uniformly over different surfaces. Pot life is 22 minutes, with a re-coat time of 3 hours. All layers should be allowed to cure for 16 hours at 73° F / 23° C and can be accelerated with mild heat. Epsilon™ PRO is clear and can be easily colored using Ignite™ or UVO™ colorants. Cured coating has a gloss finish and can be sanded, primed and painted.
Applications: Epsilon™ PRO is suitable for use as a protective, impact resistant coating for EPS or polyurethane foam. It can also be applied to plaster, concrete, wood and fabrics. This product is not sensitive to moisture / humidity and contains no VOC’s.