Compare Tool

remove

Mold Max™ 14NV

Mold Max™ 14NV Technical Specifications

Low Viscosity Tin-Cure Silicone Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Mold Max™ 14NV
Product Type
  • Silicone Rubber - Tin Cure
Mixed Viscosity7,500 cps
Mix Ratio By Weight100A:10B
Pot Life40 minutes
Cure Time4 hours
Shore A Hardness14
Specific Gravity1.12 g/cc
Specific Volume24.7 cu. in./lb.
ColorWhite
Die B Tear Strength87 pli
Tensile Strength490 psi
Elongation @ Break600 %
100% Modulus35 psi
Shrinkage0.002 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F
Volume Resistivity9.000000E+14 ohm/cm
Dielectric Constant, 100Hz3.4
Dielectric Strength>500 volts/mil
Dissipation Factor, 100Hz0.02
Thermal Conductivity0.21 W/M*K

Product Description

Mold Max™ 14NV

Mold Max™ 14NV is a Shore 14A tin-catalyzed silicone rubber that offers low viscosity, fast cure and long library life. Mold Max™ 14 NV does not require vacuum degassing. Mix ratio is 100A:10B by weight. Working time is 40 minutes and cure time is 4 hours at room temperature. Mold Max™ 14NV will reproduce the finest detail and is suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements.

Mold Max™ 14NV can also be used to create movie special effects. Cure time can be reduced with Accel-T™ cure accelerator. Mold Max™ 14NV can be used to cast a variety of materials including concrete, wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›