Compare Tool

remove

Mold Max™ 29NV

Mold Max™ 29NV Technical Specifications

Low Viscosity Tin-Cure Silicone Mold Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Mold Max™ 29NV
Product Type
  • Silicone Rubber - Tin Cure
Mixed Viscosity10,000 cps
Mix Ratio By Weight100A:10B
Pot Life40 minutes
Cure Time6 hours
Shore A Hardness29
Specific Gravity1.17 g/cc
Specific Volume23.7 cu. in./lb.
ColorYellow
Die B Tear Strength96 pli
Tensile Strength417 psi
Elongation @ Break361 %
100% Modulus54 psi
Shrinkage0.002 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F
Volume Resistivity9.000000E+14 ohm/cm
Dielectric Constant, 100Hz3.4
Dielectric Strength>500 volts/mil
Dissipation Factor, 100Hz0.02
Thermal Conductivity0.21 W/M*K

Product Description

Mold Max™ 29NV

Mold Max™ 29NV is a Shore 29A tin-catalyzed silicone mold rubber that offers low viscosity, fast cure and long library life.
Mold Max™ 29NV does not require vacuum degassing. Mix ratio is 100A:10B by weight. Working time is 45 minutes and cure time is 6 hours at room temperature.
Mold Max™ 29NV will reproduce the finest detail and is suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Cure time can be reduced with Accel-T™ cure accelerator. Mold Max™ 29NV can be used to cast a variety of materials including concrete, wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins.
Important; you must weigh Part A & B components using a gram scale to be successful with Mold Max™ 29NV.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›