Compare Tool

remove

Mold Max™ STROKE

Mold Max™ STROKE Technical Specifications

Brushable Silicone Mold Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Mold Max™ STROKE
Product Type
  • Silicone Rubber - Tin Cure
Mixed ViscosityBrushable
Mix Ratio By Weight100A:10B
Pot Life30 minutes
Thin Film Recoat Time60 minutes
Cure Time16 hours
Shore A Hardness30
Specific Gravity1.18 g/cc
Specific Volume23.5 cu. in./lb.
ColorWhite
Die B Tear Strength125 pli
Tensile Strength577 psi
Elongation @ Break300 %
Shrinkage0.002 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F

Product Description

Mold Max™ STROKE

Mold Max™ STROKE is a brushable tin silicone rubber that self-thickens for making fast brush-on molds of almost any model. Properly applied, it will hold a vertical surface and will reproduce the finest detail. Mixed 100A:10B by weight, rubber quickly develops thixotropy and can be applied with a brush or spatula. Working time is 30 minutes, re-coat time is 45 minutes and cure time after the final layer has been applied is 16 hours at room temperature.

Mold Max™ STROKE silicone will not stick to most surfaces and will cure with negligible shrinkage to a strong, flexible Shore 30A rubber. 4 thin layers is all that is necessary to make a strong and durable production mold for casting wax, gypsum, concrete or resins (urethane, polyester, etc.). Applications include reproducing sculpture, architectural restoration, candle molds, etc.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›