Compare Tool

remove

OOMOO® 30

OOMOO® 30 Technical Specifications

No Scale or Vacuum Chamber Required

 View Product

Add Material to Compare

start over

All Technical Data

OOMOO® 30
Product Type
  • Silicone Rubber - Tin Cure
Mixed Viscosity4,250 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:130B
Pot Life30 minutes
Cure Time6 hours
Shore A Hardness30
Specific Gravity1.34 g/cc
Specific Volume20.6 cu. in./lb.
ColorLavender
Die B Tear Strength40 pli
Tensile Strength240 psi
Elongation @ Break250 %
Shrinkage0.0025 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F

Product Description

OOMOO® 30

No Vacuuming – No Scale – Easy To Use . . . OOMOO® 30 is an easy to use silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). It has low viscosity for easy mixing and pouring . . . vacuum degassing is not necessary. This product cures at room temperature with negligible shrinkage. OOMOO® 30 has a 30-minute pot life, with a six-hour cure time.

For The Novice Mold Maker - OOMOO® silicones do not have great tear strength. They are good for making simple one- or twopiece block molds. If you require a high-tear strength silicone, Mold Max® silicones are recommended.

OOMOO® 30 is suitable for a variety of art-related and industrial applications including making one and two-piece block molds for sculpture and prototype reproduction, casting plaster, resins and wax. OOMOO® silicones are also suitable for electrical potting and encapsulation applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins and Coatings ›

Epoxy Casting ›

Epoxy Putties ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Silicone and Blood ›

Polymer Modifiers for Concrete and Gypsum ›