C
mpare
T
l
Key Differences
| Product Type |
|
|
| Cure Time | 30 minutes | 23 minutes |
| Shore A Hardness | 16 | 30 |
| Color | Blue-Green | Translucent |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Mold Star™ 16 FAST | Mold Star™ 31T | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 12,500 cps | 11,000 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 1A:1B | 1A:1B |
| Pot Life | 6 minutes | 5 minutes |
| Cure Time | 30 minutes | 23 minutes |
| Shore A Hardness | 16 | 30 |
| Specific Gravity | 1.18 g/cc | 1.08 g/cc |
| Specific Volume | 23.5 cu. in./lb. | 25.6 cu. in./lb. |
| Color | Blue-Green | Translucent |
| Die B Tear Strength | 88 pli | 90 pli |
| Tensile Strength | 400 psi | 423 psi |
| Elongation @ Break | 440 % | 400 % |
| 100% Modulus | 55 psi | 47 psi |
| Shrinkage | <.001 in. / in. | < .001 in. / in. |
| Useful Temperature (min) | -65 °F | -65 °F |
| Useful Temperature (max) | 450 °F | 450 °F |
Product Description
Mold Star™ 16 FAST
Mold Star™ rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star™ silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star™ 16 FAST is a fast material with a 6 minute pot life and 30 minute cure time.
Mold Star™ 31T
Mold Star™ 31T is an easy to use Shore 30A translucent platinum silicone that is mixed 1A:1B by volume (no weighing scale necessary). It features a relatively low viscosity and vacuum degassing is not required for most applications. Pot life is 5 minutes and cure time is 23 minutes at room temperature.