Compare Tool



Solaris® Technical Specifications

Clear Silicone Encapsulating Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Product Type
  • Silicone Rubber - Platinum Cure
Mixed Viscosity1,200 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B
Pot Life240 minutes
Cure Time24 hours
Shore A Hardness15
Specific Gravity0.99 g/cc
Specific Volume28.1 cu. in./lb.
Tensile Strength180 psi
Elongation @ Break290 %
100% Modulus25 psi
Shrinkage<.001 in. / in.
Useful Temperature (min)-149 °F
Useful Temperature (max)400 °F
Thermal Conductivity0.18 W/M*K
Volume Resistivity3.16E+15 ohm/cm
Refractive Index1.41 nm
Dielectric Constant, 100Hz2.78
Dielectric Strength366 volts/mil
Dissipation Factor, 100Hz0.00

Product Description


Solaris® is a low viscosity, clear and colorless liquid platinum cure silicone rubber compound designed for use in protecting of electronic components and other assemblies. It will protect components against shock, vibration, moisture, ozone, dust, chemicals and other environmental hazards.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›