Compare Tool

remove

Ecoflex™ 5

Dragon Skin™ 10 SLOW vs. Ecoflex™ 5 vs. TASK™ 14

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

TASK™ 14

Dragon Skin™ 10 SLOW vs. Ecoflex™ 5 vs. TASK™ 14Ecoflex™ 5

Semi-Rigid Black Urethane Casting Resin

 View Product

Vs.
remove

Dragon Skin™ 10 SLOW

Dragon Skin™ 10 SLOW vs. Ecoflex™ 5 vs. TASK™ 14Ecoflex™ 5 versus TASK™ 14

Addition Cure Silicone Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps800 cps23,000 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)1A:1B
Pot Life1 minute10 minutes45 minutes
Cure Time5 minutes45 minutes7 hours
Shore D Hardness50
Shore A Hardness510
ColorTranslucentBlackTranslucent
Tensile Strength350 psi1,800 psi475 psi
Elongation @ Break1,000 %125 %1,000 %
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5TASK™ 14Dragon Skin™ 10 SLOW
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps800 cps23,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B100A:120B1A:1B
Pot Life1 minute10 minutes45 minutes
Cure Time5 minutes45 minutes7 hours
Shore D Hardness50
Shore A Hardness510
Specific Gravity1.07 g/cc1.15 g/cc1.07 g/cc
Specific Volume25.8 cu. in./lb.24.1 cu. in./lb.25.8 cu. in./lb.
ColorTranslucentBlackTranslucent
Die B Tear Strength75 pli102 pli
Tensile Strength350 psi1,800 psi475 psi
Elongation @ Break1,000 %125 %1,000 %
100% Modulus15 psi22 psi
Shrinkage<.001 in. / in.0.0035 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)450 °F450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

TASK™ 14

TASK™ 14 is a fast setting two-component urethane that cures quickly to black semi-rigid plastic. TASK™ 14 offers a longer pot life (10 minutes) and demold time of 45 minutes.

With a Shore value of 50D, these semi-rigid plastics are used for a variety of industrial applications including fast mold making, fast model duplication, prototyping, durable miniatures, black props and special effects, or making parts that are impact resistant. Fully cured castings are tough, durable and chemical resistant.

For Best Results… Do not cast TASK™ 14 into platinum cure (addition cure) silicone molds.

Read More

Dragon Skin™ 10 SLOW

Dragon Skin™ silicones are high performance platinum cure liquid silicone compounds that are used for a variety of applications ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Because of the superior physical properties and flexibility of Dragon Skin™ rubbers, they are also used for medical prosthetics and cushioning applications. Dragon Skin™ rubbers are also used for a variety of industrial applications and have a service temperature range of a constant -65°F to +450°F (-53°C to +232°C)

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›