Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. Alja-Safe™ Breeze vs. TASK™ 14

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

TASK™ 14

Ecoflex™ 5 vs. Alja-Safe™ Breeze vs. TASK™ 14Ecoflex™ 5

Semi-Rigid Black Urethane Casting Resin

 View Product

Vs.
remove

Alja-Safe™ Breeze

Ecoflex™ 5 vs. Alja-Safe™ Breeze vs. TASK™ 14Ecoflex™ 5 versus TASK™ 14

Crystalline Silica-Free Liquid Alginate

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
  • Lifecasting Materials
Mixed Viscosity13,000 cps800 cpsVariable
Mix Ratio By Volume1A:1BN/A (gram scale required)5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid
Pot Life1 minute10 minutes3 minutes
Cure Time5 minutes45 minutes8 minutes
Shore D Hardness50
Shore A Hardness5
ColorTranslucentBlackBlue
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5TASK™ 14Alja-Safe™ Breeze
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
  • Lifecasting Materials
Mixed Viscosity13,000 cps800 cpsVariable
Mix Ratio By Volume1A:1B5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid
Mix Ratio By Weight1A:1B100A:120B
Pot Life1 minute10 minutes3 minutes
Cure Time5 minutes45 minutes8 minutes
Shore D Hardness50
Shore A Hardness5
Specific Gravity1.07 g/cc1.15 g/cc
Specific Volume25.8 cu. in./lb.24.1 cu. in./lb.26 cu. in./lb.
ColorTranslucentBlackBlue
Die B Tear Strength75 pli
Tensile Strength350 psi1,800 psi
Elongation @ Break1,000 %125 %
100% Modulus15 psi
Shrinkage<.001 in. / in.0.0035 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

TASK™ 14

TASK™ 14 is a fast setting two-component urethane that cures quickly to black semi-rigid plastic. TASK™ 14 offers a longer pot life (10 minutes) and demold time of 45 minutes.

With a Shore value of 50D, these semi-rigid plastics are used for a variety of industrial applications including fast mold making, fast model duplication, prototyping, durable miniatures, black props and special effects, or making parts that are impact resistant. Fully cured castings are tough, durable and chemical resistant.

For Best Results… Do not cast TASK™ 14 into platinum cure (addition cure) silicone molds.

Read More

Alja-Safe™ Breeze

No powder - no dust! Alja-Safe™ Breeze (Patent Pending) is a new liquid alginate which blends easily with water, creating a unique, skin safe moldmaking material. Alja-Safe™ Breeze is perfect for making single-use pourable molds of hands, feet and other body parts. It captures excellent detail, giving you an accurate reproduction of your original. If you want to make a mold of vertical body surfaces, you can use original Alja-Safe™ or Alja-Safe™ Acrobat™.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›