Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. TASK™ 15

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

TASK™ 15

Ecoflex™ 5 vs. TASK™ 15Ecoflex™ 5

Roto Casting, Impact Resistant Performance Resin

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
Mixed Viscosity13,000 cps600 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life1 minute6 minutes
Cure Time5 minutes1 hour
Shore D Hardness75
Shore A Hardness5
ColorTranslucentOpaque White
Tensile Strength350 psi2,720 psi
Elongation @ Break1,000 %20 %
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5TASK™ 15
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Resins
Mixed Viscosity13,000 cps600 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B75A:100B
Pot Life1 minute6 minutes
Cure Time5 minutes1 hour
Shore D Hardness75
Shore A Hardness5
Specific Gravity1.07 g/cc1.12 g/cc
Specific Volume25.8 cu. in./lb.24.7 cu. in./lb.
ColorTranslucentOpaque White
Die B Tear Strength75 pli
Tensile Strength350 psi2,720 psi
Tensile Modulus126,000 psi
Elongation @ Break1,000 %20 %
100% Modulus15 psi
Compressive Strength5,450 psi
Compressive Modulus60,000 psi
Flexural Modulus170,000 psi
Shrinkage<.001 in. / in.0.0042 in. / in.
Heat Deflection Temp117 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

TASK™ 15

TASK™ 15 is a premium performance urethane resin that has very high impact strength, even when cast in thin-wall sections. Pot life is 6 minutes and handling time 60 minutes at room temperature. Resin cures with negligible shrinkage.

Vibrant colors are possible by adding small amounts of SO-Strong™ tint, UVO pigments or IGNITE™ fluorescent colors.

Plastic fully cures with negligible shrinkage and can be machined, sanded and/or painted. TASK™ 15 features a gradual cure profile, making it ideal for rotational casting applications (making hollow parts).

Applications include making very tough prototype parts and limited run production castings as well as rotationally cast parts such as mannequins.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›