Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. Equinox™ 35 FAST vs. EpoxAcast™ 655 + 102 Hardener

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs. Vs.
remove

Equinox™ 35 FAST

Ecoflex™ 5 vs. Equinox™ 35 FAST vs. EpoxAcast™ 655 + 102 HardenerEcoflex™ 5 versus EpoxAcast™ 655 + 102 Hardener

Food Safe Silicone Mold Putty

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps23,000 cpsPutty
Mix Ratio By Volume1A:1BN/A (gram scale required)1A:1B
Pot Life1 minute75 minutes1 minute
Cure Time5 minutes9 hours7 minutes
Shore D Hardness90
Shore A Hardness535
Specific Volume25.8 cu. in./lb.16.7 cu. in./lb.21.25 cu. in./lb.
ColorTranslucentGreyLight Purple
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5EpoxAcast™ 655 + 102 HardenerEquinox™ 35 FAST
Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps23,000 cpsPutty
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B100A:11B1A:1B
Pot Life1 minute75 minutes1 minute
Cure Time5 minutes9 hours7 minutes
Shore D Hardness90
Shore A Hardness535
Specific Gravity1.07 g/cc1.66 g/cc1.25 g/cc
Specific Volume25.8 cu. in./lb.16.7 cu. in./lb.21.25 cu. in./lb.
ColorTranslucentGreyLight Purple
Die B Tear Strength75 pli140 pli
Tensile Strength350 psi520 psi
Tensile Modulus2,040,000 psi
Ultimate Tensile4,810 psi
Elongation @ Break1,000 %430 %
100% Modulus15 psi119 psi
Compressive Strength12,500 psi
Compressive Modulus125,500 psi
Flexural Strength7,660 psi
Flexural Modulus1,403,000 psi
Shrinkage<.001 in. / in.0.0006 in. / in.0.0003 in. / in.
Heat Deflection Temp135 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

EpoxAcast™ 655 + 102 Hardener

EpoxAcast655 (formerly Metalset™ A-30) is a versatile aluminum filled castable epoxy that is very hard and strong. It is dimensionally stable, even when mass cast up to 512 in3 / 8,390 cm3.

Read More

Equinox™ 35 FAST

Equinox™ Silicone Putty Products are new silicone compounds (platinum catalyst) that can be easily mixed and applied by hand to a variety of surfaces. Equinox™ Putty is mixed in equal amounts (1A:1B) by volume.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›