Compare Tool


Ecoflex™ 5

Ecoflex™ 5 vs. EpoxAmite™ WHITE 101

Super-Soft, Addition Cure Silicone Rubber

 View Product


Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
Mixed Viscosity13,000 cps3,400 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life1 minute20 minutes
Cure Time5 minutes15 hours
Shore D Hardness83
Shore A Hardness5
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5EpoxAmite™ WHITE 101
Product Type
  • Silicone Rubber - Platinum Cure
  • Epoxy Casting and Laminating Resins
Mixed Viscosity13,000 cps3,400 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B100A:20B
Pot Life1 minute20 minutes
Thin Film Working Time45 minutes
Cure Time5 minutes15 hours
Shore D Hardness83
Shore A Hardness5
Specific Gravity1.07 g/cc1.25 g/cc
Specific Volume25.8 cu. in./lb.22.2 cu. in./lb.
Die B Tear Strength75 pli
Tensile Strength350 psi
Tensile Modulus627,000 psi
Ultimate Tensile5,130 psi
Tensile Elongation0.8 %
Elongation @ Break1,000 %
100% Modulus15 psi
Compressive Strength16,290 psi
Compressive Modulus116,000 psi
Flexural Strength8,770 psi
Flexural Modulus465,000 psi
Shrinkage<.001 in. / in.
Heat Deflection Temp136 °F
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F
Flexural Strength on 6 ply / 10 oz. Laminate29,000 psi
Ultimate Tensile on 6 ply / 10 oz. Laminate24,700 psi

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

EpoxAmite™ WHITE 101

EpoxAmite™ White Epoxy Laminating System is an easy-to-use liquid epoxy system formulated for a wide variety of fabrication applications. EpoxAmite™ White Laminating System is odorless and cures at room temperature. Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.

EpoxAmite™ White Laminating System can be used with reinforcements such as S-Glass, E-Glass, Kevlar and Carbon fibers for lay-up& applications or composite parts. EpoxAmite™ White Resin can also be mixed with fillers such as fumed silica for gel coat applications. Urefil™ 3, Urefil™ 7 and other fillers can be added for fairing, filleting or bonding applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›