Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. SORTA-Clear™ 12

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

SORTA-Clear™ 12

Ecoflex™ 5 vs. SORTA-Clear™ 12Ecoflex™ 5

Addition Cure Silicone Rubber

 View Product

Add Material to Compare

start over

Key Differences

Mixed Viscosity13,000 cps6,000 cps
Pot Life1 minute40 minutes
Cure Time5 minutes12 hours
ColorTranslucentWater White Translucent
Elongation @ Break1,000 %590 %
100% Modulus15 psi23 psi
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5SORTA-Clear™ 12
Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps6,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life1 minute40 minutes
Cure Time5 minutes12 hours
Shore A Hardness512
Specific Gravity1.07 g/cc1.07 g/cc
Specific Volume25.8 cu. in./lb.25.9 cu. in./lb.
ColorTranslucentWater White Translucent
Die B Tear Strength75 pli66 pli
Tensile Strength350 psi320 psi
Elongation @ Break1,000 %590 %
100% Modulus15 psi23 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

SORTA-Clear™ 12

SORTA-Clear™ 12 is a premium water white translucent silicone rubber (platinum catalyst) which cures at room temperature with negligible shrinkage. SORTA-Clear™ 12 cures in 12 hours with a final Shore hardness of 12A. SORTA-Clear™ 12 features exceptional tear and tensile strength. Rubber clarity is especially useful when extracting models via cutting.

SORTA-Clear™ silicone is ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear™ silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear™. SORTA-Clear™ can be pigmented with SILC Pig™ pigments.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›