Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. Smooth-Sil™ 960

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

Smooth-Sil™ 960

Ecoflex™ 5 vs. Smooth-Sil™ 960Ecoflex™ 5

Shore 60A Hardness Platinum Cure Silicone

 View Product

Add Material to Compare

start over

Key Differences

Mixed Viscosity13,000 cps30,000 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life1 minute45 minutes
Cure Time5 minutes16 hours
Shore A Hardness560
ColorTranslucentGreen
Die B Tear Strength75 pli110 pli
Tensile Strength350 psi650 psi
Elongation @ Break1,000 %270 %
100% Modulus15 psi280 psi
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5Smooth-Sil™ 960
Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Platinum Cure
Mixed Viscosity13,000 cps30,000 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B100A:10B
Pot Life1 minute45 minutes
Cure Time5 minutes16 hours
Shore A Hardness560
Specific Gravity1.07 g/cc1.25 g/cc
Specific Volume25.8 cu. in./lb.22.2 cu. in./lb.
ColorTranslucentGreen
Die B Tear Strength75 pli110 pli
Tensile Strength350 psi650 psi
Elongation @ Break1,000 %270 %
100% Modulus15 psi280 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F-65 °F
Useful Temperature (max)450 °F450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

Smooth-Sil™ 960

Smooth-Sil™ 960 is a Shore 60A platinum cure silicone rubber developed for a variety of industrial applications. Compared to other 60A platinum silicones, Smooth-Sil™ 960 has a relatively low viscosity and is easy to mix, de-air and pour. Silicone cures in 16 hours with negligible shrinkage to a firm rubber with high tensile and tear strength.

Smooth-Sil™ 960 offers good chemical and heat resistance, making this a good choice for production casting of resins and expanding foams. Because of its firmness, Smooth-Sil™ 960 molds are also used for spin casting. It is also used for embedding and electrical applications. Smooth-Sil™ 960 is suitable for food related applications. 
Note: This product will not cure against surfaces containing sulfur, even when sealed.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›