Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. Skin Tite™

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

Skin Tite™

Ecoflex™ 5 vs. Skin Tite™Ecoflex™ 5

Silicone Appliance Builder and Adhesive for Skin F/X

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed Viscosity13,000 cps23,000 cps
Pot Life1 minute3 minutes
Shore A Hardness5
ColorTranslucentTranslucent Clear
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5Skin Tite™
Product Type
  • Silicone Rubber - Platinum Cure
  • Silicone Rubber - Platinum Cure
  • Skin Safe FX Materials
Mixed Viscosity13,000 cps23,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life1 minute3 minutes
Cure Time5 minutes5 minutes
Shore A Hardness5
Specific Gravity1.07 g/cc1.07 g/cc
Specific Volume25.8 cu. in./lb.
ColorTranslucentTranslucent Clear
Die B Tear Strength75 pli
Tensile Strength350 psi
Elongation @ Break1,000 %
100% Modulus15 psi
Shrinkage<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

Skin Tite™

Skin Tite™ is a skin safe silicone used to create fast wounds, scars and to adhere silicone appliances directly to the skin. It can be sculpted “on the fly”, offers maximum control and stays precisely where you put it. Skin Tite™ will adhere to the skin and perfectly conforms to all contours. Cured rubber is strong and will flex with body movement. Wounds and appliances will not come off until you remove them. Material is skin safe and certified by an independent laboratory.

An infinite variety of color effects are achieved using Silc Pig™ silicone pigments. Blended Silc Pig™ color pigments added to Skin Tite™ will create hyper-realistic cuts, scars, slash wounds, bruises, necrotic (dead skin) effects, bullet holes and more. Thi-vex™ thickener will thicken Skin Tite™ for even greater vertical hang control and is ideal for creating skin pockets, hanging skin, deep cuts & wounds, holes and more.

Bio-Adhesive: Skin Tite™ can also be used to adhere skin effects silicone appliances or silicone masks to the skin even when affixed to hard to hold areas such as elbows, fingers and joints. It is ideal for repetitive motion applications. Skin Tite™ will release from closely cropped hair-covered skin surfaces (short arm hair, beards, moustaches and eyebrows). 

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›