Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. VytaFlex™ 20

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

VytaFlex™ 20

Ecoflex™ 5 vs. VytaFlex™ 20Ecoflex™ 5

Urethane Mold Rubber For Perfect Concrete Castings

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cps1,000 cps
Pot Life1 minute30 minutes
Cure Time5 minutes16 hours
Shore A Hardness520
ColorTranslucentClear Amber
Tensile Strength350 psi200 psi
100% Modulus15 psi50 psi
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5VytaFlex™ 20
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cps1,000 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B1A:1B
Pot Life1 minute30 minutes
Cure Time5 minutes16 hours
Shore A Hardness520
Specific Gravity1.07 g/cc1.00 g/cc
Specific Volume25.8 cu. in./lb.27.7 cu. in./lb.
ColorTranslucentClear Amber
Die B Tear Strength75 pli
Die C Tear Strength60 pli
Tensile Strength350 psi200 psi
Elongation @ Break1,000 %1,000 %
100% Modulus15 psi50 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

VytaFlex™ 20

Using Smooth-On’s exclusive “V-Polymer™” technology, VytaFlex™ urethane rubbers offer superior physical and performance properties for casting concrete. VytaFlex™ urethanes are available in 10A, 20A, 30A, 40A,  45A, 50A and 60A Shore hardness’s and feature convenient one-to-one by volume mix ratios.

Vacuum degassing is not necessary and VytaFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production.

VytaFlex™ mold rubbers work especially well for casting pigmented / colored concrete. Molds made with VytaFlex™ Series urethanes will render accurate and uniform colored castings.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›