Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. PMC®-724

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

PMC®-724

Ecoflex™ 5 vs. PMC®-724Ecoflex™ 5

Polyurethane Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cps4,000 cps
Mix Ratio By Volume1A:1BN/A (gram scale required)
Pot Life1 minute20 minutes
Cure Time5 minutes16 hours
Shore A Hardness540
Specific Volume25.8 cu. in./lb.20.1 cu. in./lb.
ColorTranslucentOff-White
Tensile Strength350 psi600 psi
100% Modulus15 psi80 psi
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5PMC®-724
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cps4,000 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B10A:100B
Pot Life1 minute20 minutes
Cure Time5 minutes16 hours
Shore A Hardness540
Specific Gravity1.07 g/cc1.38 g/cc
Specific Volume25.8 cu. in./lb.20.1 cu. in./lb.
ColorTranslucentOff-White
Die B Tear Strength75 pli
Die C Tear Strength90 pli
Tensile Strength350 psi600 psi
Elongation @ Break1,000 %>700 %
100% Modulus15 psi80 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

PMC®-724

Used by artists and industry the world over for a variety of design, casting and special effects applications, PMC®-724 is by far the most versatile urethane rubber compound available on the market today. It is inexpensive, mixes and pours easily, and will cure to a durable rubber with negligible shrinkage. Low viscosity ensures flawless pick-up of even the finest detail with minimal bubble entrapment.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›