Compare Tool

remove

Ecoflex™ 5

Ecoflex™ 5 vs. EZ-Mix® 40

Super-Soft, Addition Cure Silicone Rubber

 View Product

Vs.
remove

EZ-Mix® 40

Ecoflex™ 5 vs. EZ-Mix® 40Ecoflex™ 5

Brushable Urethane Rubber Compound

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cpsBrushable
Pot Life1 minute18 minutes
Cure Time5 minutes16 hours
Shore A Hardness540
ColorTranslucentGrey
Elongation @ Break1,000 %577 %
Disclaimer
Although we do our best to ensure the accuracy of this Compare Tool, Smooth-On offers no warranty either expressed or implied as to the reliability of the information contained herein. Smooth-On assumes no liability for loss or damage associated with use of the Compare Tool. If this is a critical project, we encourage you to review all of the technical data below and contact our Technical Service department with any questions or concerns.

All Technical Data

Ecoflex™ 5EZ-Mix® 40
Product Type
  • Silicone Rubber - Platinum Cure
  • Urethane Rubber
Mixed Viscosity13,000 cpsBrushable
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight1A:1B100A:95B
Pot Life1 minute18 minutes
Cure Time5 minutes16 hours
Shore A Hardness540
Specific Gravity1.07 g/cc1.025 g/cc
Specific Volume25.8 cu. in./lb.27 cu. in./lb.
ColorTranslucentGrey
Die B Tear Strength75 pli
Die C Tear Strength67 pli
Tensile Strength350 psi420 psi
Elongation @ Break1,000 %577 %
100% Modulus15 psi
Shrinkage<.001 in. / in.<.001 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)450 °F

Product Description

Ecoflex™ 5

Ecoflex™ rubbers are platinum-catalyzed silicones that are versatile and easy to use. Ecoflex™ rubbers are mixed 1A:1B by weight or volume and cured at room temperature with negligible shrinkage.  Low viscosity ensures easy mixing and de-airing. Dispense using our convenient dispensing cartridges. Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion.

Read More

EZ-Mix® 40

EZ-MIX® 40 is a brushable polyurethane rubber mold compound that mixes and applies easily. Two liquids (Part A and Part B) are measured and combined in equal amounts by volume (no scale is necessary). After a few minutes of mixing, EZ-MIX® 40 is ready to be applied to a vertical surface with a brush. After a suitable thickness is attained (multiple layers), EZ-MIX® 40 cures overnight with negligible shrinkage to a flexible, durable mold rubber. Following the application of a support shell, a rubber mold made with EZMIX® 40 is suitable for casting a variety of materials including wax, gypsum, urethane/epoxy resins, concrete, cement, etc.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›