Compare Tool

remove

XTC-3D™

XTC-3D™ Technical Specifications

High Performance 3D Print Coating

 View Product

Add Material to Compare

start over

All Technical Data

XTC-3D™
Product Type
  • Epoxy Casting, Coating and Laminating Resins
Mixed Viscosity350 cps
Mix Ratio By Volume2A:1B
Mix Ratio By Weight100A:42B
Thin Film Working Time20 minutes
Thin Film Recoat Time90 minutes
Tack Free Time2 hours
Shore D Hardness80
Specific Gravity1.09 g/cc
Specific Volume25.1 cu. in./lb.
ColorClear (Slightly Yellow In Thick Sections)

Product Description

XTC-3D™

XTC-3D™ is a protective coating for smoothing and finishing 3D printed parts. Two liquids are mixed together and brushed onto any 3D print. Coating self-levels and wets out uniformly without leaving brush strokes. Working time is 10 minutes and cure time is about 4 hours (depending on mass and temperature). XTC-3D™ cures to a hard, impact resistant coating that can be sanded, primed and painted. Adding colors and metal effects is easy.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins and Coatings ›

Epoxy Casting ›

Epoxy Putties ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›