Compare Tool

remove

PMC®-121 50/WET

PMC®-121 50/WET Technical Specifications

Easy To Use Urethane Rubber

 View Product

Add Material to Compare

start over

All Technical Data

PMC®-121 50/WET
Product Type
  • Urethane Rubber
Mixed Viscosity1,400 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight1A:1B
Pot Life30 minutes
Cure Time16 hours
Shore A Hardness50
Specific Gravity1.04 g/cc
Specific Volume26.7 cu. in./lb.
ColorClear Amber
Die C Tear Strength85 pli
Tensile Strength350 psi
Elongation @ Break500 %
100% Modulus82 psi
Shrinkage< .001 in. / in.

Product Description

PMC®-121 50/WET

The PMC®-121 Series urethane rubbers feature convenient one-to-one by volume mix ratios. PMC®-121/50 is a “wet-only” mold rubber that is long lasting and durable when used in a variety of applications including reproduction of ornamental plaster, precast concrete and ceramic case molds. Note: “wet” rubber has a higher net shrinkage value vs. “dry” rubber.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›