Compare Tool

remove

PMC®-746

PMC®-746 Technical Specifications

Polyurethane Rubber Compound

 View Product

Add Material to Compare

start over

All Technical Data

PMC®-746
Product Type
  • Urethane Rubber
Mixed Viscosity1,200 cps
Mix Ratio By Volume2A:1B
Mix Ratio By Weight2A:1B
Pot Life15 minutes
Cure Time16 hours
Shore A Hardness60
Specific Gravity1.03 g/cc
Specific Volume26.9 cu. in./lb.
ColorAmber
Die C Tear Strength100 pli
Tensile Strength700 psi
Elongation @ Break650 %
100% Modulus220 psi
Shrinkage< .001 in. / in.

Product Description

PMC®-746

PMC®-746 was developed to make molds for casting gypsum plasters. This product is well suited for use as a rubber case mold – especially large case molds where extra rigidity is required. Shore hardness is 60A. Because of its durability and moisture resistant properties PMC®-746 is also used by zoos and museums for a variety of mold-making, display and exhibit applications. It features a convenient mix ratio (2:1 by weight or volume), and contains no mercury.

Other applications include making plaster block molds, reproducing ornamental plaster (architectural restoration), pre-cast concrete molds, casting waxes, Smooth-On rigid polyurethanes and epoxies and also for making a variety of special effects for movies and theatre.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›