Compare Tool

remove

Clear Flex™ 30

Clear Flex™ 30 Technical Specifications

Water Clear Urethane Rubber

 View Product

Add Material to Compare

start over

All Technical Data

Clear Flex™ 30
Product Type
  • Urethane Rubber
Mixed Viscosity750 cps
Mix Ratio By Volume1A:1B
Mix Ratio By Weight100A:94B
Pot Life15 minutes
Cure Time16 hours
Shore A Hardness30
Specific Gravity1.03 g/cc
Specific Volume26.9 cu. in./lb.
ColorClear
Die C Tear Strength54 pli
Tensile Strength725 psi
Elongation @ Break675 %
Shrinkage0.002 in. / in.

Product Description

Clear Flex™ 30

Clear Flex™ 30 is a mercury-free and phthalate-free water white clear urethane liquid rubber compound designed for applications that require absolute clarity and resistance to sunlight. Low viscosity ensures easy mixing and pouring. Clear Flex™ 30 cures at room temperature with negligible shrinkage.

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›