Compare Tool

remove

Crystal Clear™ 200

Crystal Clear™ 200 Technical Specifications

Clear Urethane Casting Resin

 View Product

Add Material to Compare

start over

All Technical Data

Crystal Clear™ 200
Product Type
  • Urethane Resins
Mixed Viscosity600 cps
Mix Ratio By Weight100A:90B
Pot Life20 minutes
Cure Time16 hours
Shore D Hardness80
Specific Gravity1.036 g/cc
Specific Volume26.7 cu. in./lb.
ColorClear
Tensile Strength2,500 psi
Elongation @ Break10 %
Compressive Strength6,385 psi
Compressive Modulus40,000 psi
Flexural Strength10,650 psi
Flexural Modulus200,000 psi
Shrinkage0.001 in. / in.
Heat Deflection Temp120 °F

Product Description

Crystal Clear™ 200

Crystal Clear™ 200 is a water white clear and made specifically for applications that require clarity. These rigid urethane casting resins differ only in working and demold times. Low viscosity ensures easy mixing and pouring. Crystal Clear™ resins cure at room temperature* with negligible shrinkage.

CAUTION: NOT FOR HOME USE. THIS PRODUCT IS FOR INDUSTRIAL USE ONLY. With adequate local exhaust ventilation, respiratory protection is not normally required when using this product. Where risk assessment shows air-purifying respirators are appropriate, follow OSHA respirator regulations and European Standards EN 141, 143 and 371. Protective clothing (gloves and long sleeves) is required to minimize the risk of dermal sensitization. If breathing is affected or a dermal rash develops, immediately cease using this product and seek medical attention. Read SDS before using.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Mix and Pour Expanding Foams ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›