Easy to use and exhibiting good wear resistance, polyurethane mold rubber can be poured, brushed on or sprayed onto prepared surfaces and cure with negligible shrinkage. Urethane mold rubbers are economical, reproduce exceptional detail and are best suited for production casting of concrete, gypsum and wax.
| Hardness | Die C Tear Strength | ||
|---|---|---|---|
| › VytaFlex™ 10 | 10 A | 38 pli | + Compare |
| › VytaFlex™ 20 | 20 A | 60 pli | + Compare |
| › VytaFlex™ 30 | 30 A | 78 pli | + Compare |
| › VytaFlex™ 40 | 40 A | 82 pli | + Compare |
| › VytaFlex™ 45 | 45 A | 100 pli | + Compare |
| › VytaFlex™ 50 | 50 A | 102 pli | + Compare |
| › VytaFlex™ 60 | 60 A | 136 pli | + Compare |
| Hardness | Die C Tear Strength | ||
|---|---|---|---|
| › ReoFlex™ 20 | 20 A | 60 pli | + Compare |
| › ReoFlex™ 30 | 30 A | 82 pli | + Compare |
| › ReoFlex™ 40 | 40 A | 85 pli | + Compare |
| › ReoFlex™ 50 | 50 A | 120 pli | + Compare |
| › ReoFlex™ 60 | 60 A | 132 pli | + Compare |
| Pot Life | Cure Time | Hardness | ||
|---|---|---|---|---|
| › PMC™-121/30 DRY | 30 mins | 16 hrs | 30 A | + Compare |
| › PMC™-121 30/WET | 30 mins | 16 hrs | 30 A | + Compare |
| › PMC™-121/50 WET | 30 mins | 16 hrs | 50 A | + Compare |
| › PMC™-724 | 20 mins | 16 hrs | 40 A | + Compare |
| › PMC™-744 | 15 mins | 16 hrs | 44 A | + Compare |
| › PMC™-746 | 15 mins | 16 hrs | 60 A | + Compare |
| › PMC™-746 Clear Amber | 15 mins | 16 hrs | 60 A | + Compare |
| › PMC™-770 | 30 mins | 16 hrs | 70 A | + Compare |
| › PMC™-780 DRY | 25 mins | 48 hrs | 80 A | + Compare |
| › PMC™-780 WET | 25 mins | 48 hrs | 80 A | + Compare |
| › PMC™-790 | 20 mins | 48 hrs | 90 A | + Compare |
| Hardness | Tensile Strength | ||
|---|---|---|---|
| › Brush-On™ 35 | 35 A | 335 psi | + Compare |
| › Brush-On™ 40 | 40 A | 300 psi | + Compare |
| › Brush-On™ 50 | 50 A | 500 psi | + Compare |
| › Brush-On™ 60 | 60 A | 630 psi | + Compare |
| Hardness | Pot Life | Handling Time | Cure Time | ||
|---|---|---|---|---|---|
| › KX Flex™ 40 | 40 A | 2.5 mins | 30 mins | 24 hrs | + Compare |
| › KX Flex™ 60 | 60 A | 2.5 mins | 30 mins | 24 hrs | + Compare |
| › KX Flex™ 90 | 90 A | 2.5 mins | 30 mins | 24 hrs | + Compare |
| Hardness | Tensile Strength | ||
|---|---|---|---|
| › Simpact™ 60A | 60 A | 990 psi | + Compare |
| › Simpact™ 80A-II | 80 A | 2,295 psi | + Compare |
| › Simpact™ 85A | 85 A | 1,573 psi | + Compare |
| Hardness | Die C Tear Strength | ||
|---|---|---|---|
| › Econ™ 60 | 60 A | 85 pli | + Compare |
| › Econ™ 80 | 80 A | 77 pli | + Compare |
| Description | ||
|---|---|---|
| › Ultimate Vine Making Kit™ | Create Realistic Artificial Vines | + Compare |
| Description | ||
|---|---|---|
| › UreCoat™ | Flexible urethane coating | + Compare |
| Mix Ratio By Weight | Mix Ratio By Volume | Hardness | ||
|---|---|---|---|---|
| › Clear Flex™ 30 | 100A:94B | 1A:1B | 30 A | + Compare |
| › Clear Flex™ 50 | 1A:2B | – | 50 A | + Compare |
| › Clear Flex™ 95 | 1A:1.5B | – | 95 A | + Compare |
| Description | ||
|---|---|---|
| › EZ-Mix™ 40 | Brushable Urethane Rubber Compound | + Compare |
| Description | ||
|---|---|---|
| › EZ~Spray™ 45 | Sprayable Urethane Rubber Compound | + Compare |
| Description | ||
|---|---|---|
| › Formlastic™ 48 | Urethane Moldmaking Rubber | + Compare |
| › Formlastic™ 60 | Urethane Moldmaking Rubber | + Compare |
| Description | ||
|---|---|---|
| › Compat™ 45 | Non-Inhibiting Urethane Rubber | + Compare |
| Description | ||
|---|---|---|
| › SO-Strong™ | Colorants for Urethane Rubber, Resin and Foam | + Compare |
| › Ignite™ | Fluorescent Colorants For Liquid Rubber, Plastic and Foam | + Compare |
| › UVO™ | UV Resistant Colorants for Epoxy and Urethane. | + Compare |
| › Kick-iT!™ | Cure Accelerator For Urethane Rubber | + Compare |
| › SO-FLEX™ II | Softening Agent For Urethane Rubber | + Compare |
| › Sun Devil™ | UV Resistant Additive | + Compare |
| › XTEND-IT™ | Dry Gas Blanket | + Compare |
| › URE-BOND™ II | Flexible Urethane Adhesive | + Compare |
| › Cryptolyte™ | UV Glow Additive for Urethanes and Silicones | + Compare |
| › URE-FIL™ 9 | Fumed-Silica Based Thickening Agent | + Compare |
| › URE-FIL™ 11 | Fiber Filler for Urethane and Silicone | + Compare |