C
mpare
T
l
Add Material to Compare
All Technical Data
| Smooth‑Sil™ 936 | |
|---|---|
| Product Type |
|
| Mixed Viscosity | 21,000 cps |
| Mix Ratio By Weight | 100A:10B |
| Pot Life | 60 minutes |
| Cure Time | 24 hours |
| Shore A Hardness | 36 |
| Specific Gravity | 1.21 g/cc |
| Specific Volume | 22.9 cu. in./lb. |
| Color | Blue |
| Die B Tear Strength | 110 pli |
| Tensile Strength | 550 psi |
| Elongation @ Break | 500 % |
| 100% Modulus | 180 psi |
| Shrinkage | <0.001 in. / in. |
| Useful Temperature (min) | -65 °F |
| Useful Temperature (max) | 450 °F |
Product Description
Smooth‑Sil™ 936
Smooth-Sil™ Platinum Silicones cure at room temperature with negligible shrinkage. With different hardnesses to choose from, Smooth-Sil™ products offer tremendous versatility and are suitable for making production molds of any configuration, large or small. These silicones exhibit good chemical, abrasion and heat resistance. Materials such as plasters, concrete, wax, low-melt metal alloys or resins (urethane, epoxy or polyester) can then be cast into these silicone rubbers without a release agent.
Smooth-Sil™ 936 is a lower viscosity platinum silicone rubber (21,000 cps). It is easier to mix, vacuum degas and pour. Smooth-Sil™ Platinum Silicones are used for rapid prototyping, wax casting (foundries and candle makers), architectural restoration and for casting concrete.