C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 410 cps | 1,800 cps |
| Pot Life | 8.5 minutes | 30 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore D Hardness | 58 | — |
| Shore A Hardness | — | 20 |
| Specific Volume | 41.3 cu. in./lb. | 27.3 cu. in./lb. |
| Color | Beige | Off White |
| Elongation @ Break | 1.6 % | 1,000 % |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| Feather Lite™ | ReoFlex™ 20 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 410 cps | 1,800 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | — | 1A:1B |
| Pot Life | 8.5 minutes | 30 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore D Hardness | 58 | — |
| Shore A Hardness | — | 20 |
| Specific Gravity | 0.67 g/cc | 1.01 g/cc |
| Specific Volume | 41.3 cu. in./lb. | 27.3 cu. in./lb. |
| Color | Beige | Off White |
| Die C Tear Strength | — | 60 pli |
| Tensile Strength | — | 200 psi |
| Tensile Modulus | 156,000 psi | — |
| Ultimate Tensile | 2,160 psi | — |
| Elongation @ Break | 1.6 % | 1,000 % |
| 100% Modulus | — | 27 psi |
| Compressive Strength | 3,070 psi | — |
| Compressive Modulus | 53,700 psi | — |
| Flexural Strength | 3,440 psi | — |
| Flexural Modulus | 164,300 psi | — |
| Shrinkage | 0.003 in. / in. | <.001 in. / in. |
| Heat Deflection Temp | 140 °F | — |
Product Description
Feather Lite™
Feather Lite™ is a heavily filled low-density urethane casting resin. Cured plastic is lightweight (it floats in water!) and has a much lower density than other casting resins.
Feather Lite™ features a convenient 1A:1B by volume mix ratio and mixes easily (pre-mixing of parts A & B is necessary). Cured plastic is strong and can be carved, machined, drilled, sanded, etc. Feather Lite™ can be pigmented with SO-Strong™ color tints prior to casting and finished castings can be painted. And because this product is low-density, it yields more plastic per pound/kg. than other casting resins, the cost per casting is low. Feather Lite™ can be used for a variety of art or industrial design related applications including reproducing sculpture, making fishing lures, prototype model making, casting doll heads and figures, etc.
ReoFlex™ 20
ReoFlex™ urethane rubbers offer superior physical and performance properties for production casting of wax, plasters, and resins. ReoFlex™ urethanes are available in 20A, 30A, 40A, 50A and 60A Shore hardnesses and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and ReoFlex™ rubbers cure with negligible shrinkage to a durable rubber that will last in production. ReoFlex™ “Wet” rubbers will shrink somewhat over time vs. “Dry” formulations.
ReoFlex™ mold rubbers are used for a variety of applications including making molds to reproduce sculpture and architectural elements, as well as for making special effects, toys and prototypes. Vibrant colors can be achieved by adding So-Strong™ Color Tints, available from Smooth-On.
Casting Concrete? Look into the VytaFlex™ series of urethane mold rubbers. VytaFlex™ urethanes were formulated specifically for casting concrete / pigmented concrete and feature Smooth-On’s exclusive ‘V-Polymer™’ technology.
FOR COMMERCIAL/INDUSTRIAL USE ONLY