Compare Tool

remove

FOAM-iT!™ 4 BLACK

OOMOO™ 30 vs. FOAM-iT!™ 4 BLACK

Rigid Urethane Expanding Foams

 View Product

Vs.
remove

OOMOO™ 30

OOMOO™ 30 vs. FOAM-iT!™ 4 BLACKFOAM-iT!™ 4 BLACK

No Scale or Vacuum Chamber Required

 View Product

Add Material to Compare

start over

Key Differences

Product Type
  • Urethane Expanding Foams
  • Silicone Rubber - Tin Cure
Mixed Viscosity300 cps4,250 cps
Pot Life1.5 minutes30 minutes
Cure Time2 hours6 hours
Shore A Hardness30
Specific Volume420 cu. in./lb.20.6 cu. in./lb.
ColorBlackLavender
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.

All Technical Data

FOAM-iT!™ 4 BLACKOOMOO™ 30
Product Type
  • Urethane Expanding Foams
  • Silicone Rubber - Tin Cure
Mixed Viscosity300 cps4,250 cps
Mix Ratio By Volume1A:1B1A:1B
Mix Ratio By Weight100A:87B100A:130B
Pot Life1.5 minutes30 minutes
Tack Free Time20 minutes
Cure Time2 hours6 hours
Shore A Hardness30
Expansion (approximate)14 times
Foam Density4 lb/ft³
Specific Gravity0.06 g/cc1.34 g/cc
Specific Volume420 cu. in./lb.20.6 cu. in./lb.
ColorBlackLavender
Die B Tear Strength40 pli
Tensile Strength240 psi
Elongation @ Break250 %
100% Modulus100 psi
Shrinkage0.0025 in. / in.
Useful Temperature (min)-65 °F
Useful Temperature (max)400 °F

Product Description

FOAM-iT!™ 4 BLACK

Smooth-On’s FOAM-iT!™ Series are two-component water blown rigid foams that are versatile and easy to use. FOAM-iT!™ products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM-iT!™ product you are using) and develop a uniform cell structure. FOAM-iT!™ 4 Black is pre-pigmented to a very deep black color.

All FOAM-iT!™ products can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with SO-Strong™, UVO™ or IGNITE™ colorants and are used for a variety of art/ craft, industrial design and special effects applications

 Click here for more FOAM-iT!™ rigid foam products.

Read More

OOMOO™ 30

No Vacuuming – No Scale – Easy To Use . . . OOMOO™ 30 is an easy to use tin cure silicone rubber compound that features a convenient one-to-one by volume mix ratio (no scale necessary). It has low viscosity for easy mixing and pouring . . . vacuum degassing is not necessary. This product cures at room temperature with negligible shrinkage. OOMOO™ 30 has a 30-minute pot life, with a six-hour cure time.

For The Novice Mold Maker - OOMOO™ silicones do not have great tear strength. They are good for making simple one- or two piece block molds. If you require a high-tear strength silicone, Mold Max™ silicones are recommended.

OOMOO™ 30 is suitable for a variety of art-related and industrial applications including making one and two-piece block molds for sculpture and prototype reproduction, casting plaster, resins and wax. OOMOO™ silicones are also suitable for electrical potting and encapsulation applications.

Read More

Select a Material from a Category Below

Silicone Rubber - Tin Cure ›

Silicone Rubber - Platinum Cure ›

Silicone Expanding Foams - Platinum Cure ›

Urethane Rubber ›

Polysulfide Rubber ›

Urethane Resins ›

Urethane Expanding Foams ›

Epoxy Casting and Laminating Resins ›

Epoxy Putties ›

Epoxy and Urethane Coatings ›

Flame Rated Materials ›

Adhesives ›

Lifecasting Materials ›

Skin Safe FX Materials ›

Polymer Modifiers for Concrete and Gypsum ›