C
mpare
T
l
Key Differences
| Mixed Viscosity | 1,000 cps | 500 cps |
| Pot Life | 35 seconds | 1.5 minutes |
| Foam Density | 6 lb/ft³ | 26 lb/ft³ |
| Specific Volume | 280 cu. in./lb. | 60 cu. in./lb. |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 6 Pillow Soft | FOAM-iT!™ 26 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 500 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 105A:100B | 100A:90B |
| Pot Life | 35 seconds | 1.5 minutes |
| Tack Free Time | — | 20 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 2 hours |
| Expansion (approximate) | 10 times | 2 times |
| Foam Density | 6 lb/ft³ | 26 lb/ft³ |
| Specific Gravity | 0.09 g/cc | 0.42 g/cc |
| Specific Volume | 280 cu. in./lb. | 60 cu. in./lb. |
| Color | White | White |
Product Description
FlexFoam-iT!™ 6 Pillow Soft
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.
› Click here for more FlexFoam-iT!™ flexible foam products.
FOAM-iT!™ 26
Smooth-On’s FOAM-iT!™ Series are two-component water blown rigid foams that are versatile and easy to use. FOAM-iT!™ products are available in 3lb., 4 lb., 5 lb., 8 lb., 10 lb.,15 lb. or 26 lb. per cubic foot densities. Parts A and B are measured and mixed in equal amounts by volume. The mixture is then poured into a mold or other form (apply release agent if necessary). The mixture will expand many times original volume (depending on which FOAM-iT!™ product you are using) and develop a uniform cell structure. FOAM-IT!™ 26 is tack-free in about 4 - 6.5 minutes, developing handling strength in 20 minutes and full cure in 2 hours. FOAM-iT!™ 26 can be cast in blocks as a machinable prototype modeling board.
All FOAM-iT!™ products can be used as a straight casting material, backfill material for hollow castings (adds structural strength) or as an encapsulation material, etc. They can be color pigmented with SO-Strong™, UVO™ or IGNITE™ colorants and are used for a variety of art/ craft, industrial design and special effects applications.