C
mpare
T
l
Key Differences
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 2,600 cps |
| Pot Life | 35 seconds | 25 minutes |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 45 |
| Specific Volume | 280 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Brown |
Disclaimer
Although we do our best to ensure accuracy, Smooth-On offers no warranties, promises, and/or representations of any kind, either expressed or implied, as to the accuracy, completeness, or reliability of the information contained on this Compare Tool, nor suitability of the information contained herein to your particular circumstances. Smooth-On assumes no liability for losses or damages of whatever nature (direct, indirect, consequential or other) associated with your use, or inability to use, the Compare Tool, or from your use (or failure to use) the information contained herein. Other useful tools include product technical bulletins and our extensive FAQ section. You can also contact our technical support team.All Technical Data
| FlexFoam-iT!™ 6 Pillow Soft | Compat™ 45 | |
|---|---|---|
| Product Type |
|
|
| Mixed Viscosity | 1,000 cps | 2,600 cps |
| Mix Ratio By Volume | 1A:1B | 1A:1B |
| Mix Ratio By Weight | 105A:100B | 85A:100B |
| Pot Life | 35 seconds | 25 minutes |
| Handling Time | 60 minutes | — |
| Cure Time | 2 hours | 16 hours |
| Shore A Hardness | — | 45 |
| Expansion (approximate) | 10 times | — |
| Foam Density | 6 lb/ft³ | — |
| Specific Gravity | 0.09 g/cc | 1.12 g/cc |
| Specific Volume | 280 cu. in./lb. | 24.7 cu. in./lb. |
| Color | White | Brown |
| Die C Tear Strength | — | 101 pli |
| Tensile Strength | — | 629 psi |
| Elongation @ Break | — | 772 % |
| 100% Modulus | — | 137 psi |
| Shrinkage | — | <0.001 in. / in. |
Product Description
FlexFoam-iT!™ 6 Pillow Soft
FlexFoam-iT!™ Series foams are premium quality water blown flexible foams that can be used for a variety of industrial, special effects and art & crafts and projects. With several to choose from, uses include making theatrical props (swords, knives, hammers, etc.), industrial gaskets, custom padding and cushioning, and more. SO-Strong™, UVO™ or IGNITE™ colorants can be added for color effects.
Part A and B liquids are combined, mixed and poured into a mold or other form (apply release agent if necessary). Mixture will rise and cure quickly to a solid, flexible foam. Foams vary by density and offer good physical properties.
› Click here for more FlexFoam-iT!™ flexible foam products.
Compat™ 45
Compat™ 45 urethane is a unique urethane rubber which will not inhibit the cure of most Smooth-On platinum or tin cure silicone rubbers. It features a low viscosity for easy mixing and pouring and cures with minimal bubble entrapment. Mix ratio is 1A:1B by volume (85A:100B by weight), pot life is 25 minutes and the rubber cures with an ultimate Shore hardness of Shore 45A. Cured rubber is dimensionally stable (low shrinkage), offers good wear resistance and excellent library life. Compat™ 45 can be used for a variety of applications including making molds to cast silicone prop body parts, animatronic skins and medical trainers, as well as for making rubber masters which can be molded using platinum or tin silicone without inhibition concerns.
Important; Do not use Ecoflex™ Gel, Ecoflex™ 00-10, Ecoflex™ Near Clear, Encapso-K, Rubber Glass™, Solaris™, Soma Foama™ or Sorta-Clear™ 12 or 37 with this product. They are not compatible and inhibition will result.